What could cause F4 to keep blowing? PT orange secondary seem okay with 2.8 ohms resistance end to end.
This circuit controls power lights and channel switching. Happens with or without footswitch connected.
Schematic attached. Woops, schematic is too large to upload. Available at https://www.thetubestore.com/lib/thetubestore/schematics/Peavey/Peavey-Triumph-Schematic.pdf
Thank you.
This circuit controls power lights and channel switching. Happens with or without footswitch connected.
Schematic attached. Woops, schematic is too large to upload. Available at https://www.thetubestore.com/lib/thetubestore/schematics/Peavey/Peavey-Triumph-Schematic.pdf
Thank you.
Attachments
The CR15 rectifier is powered from the center tap, so you would expect that.
Note that C48 is a 35V rated capacitor, so you would not expect more than 25V or so on it regardless.
Note that C48 is a 35V rated capacitor, so you would not expect more than 25V or so on it regardless.
