Hi I built a DIY speaker earlier in the year and have used the Sure Wondom Jab5 4x100w amplifier with built-in ADAU1701 dsp. I have only ever used Bluetooth with it and it works perfectly fine like that and is great.
However recently been speaking to someone who had their own DIY speaker and asked if I had XLR input so we could connect them together. And they also said I could then also use that same XLR input to connect decks to my speaker if I wanted too. Which would be a great option!
I read on the sigma studio forum something about having to have a manual switch to toggle between Bluetooth and aux input. But it wasn't explained how to program that into the software. Also im unsure if aux and xlr would be different anyway?
Can anyone please help me in how to program sigma studio in order to accept a XLR input. I want to keep the Bluetooth input as well. Sigma studio itself i am still quite new to it, I have looked everywhere before posting here. I have added my sigma studio file for how i have it set.
Amplifier (there is also a wiring diagram photo) - https://store.sure-electronics.com/product/756
However recently been speaking to someone who had their own DIY speaker and asked if I had XLR input so we could connect them together. And they also said I could then also use that same XLR input to connect decks to my speaker if I wanted too. Which would be a great option!
I read on the sigma studio forum something about having to have a manual switch to toggle between Bluetooth and aux input. But it wasn't explained how to program that into the software. Also im unsure if aux and xlr would be different anyway?
Can anyone please help me in how to program sigma studio in order to accept a XLR input. I want to keep the Bluetooth input as well. Sigma studio itself i am still quite new to it, I have looked everywhere before posting here. I have added my sigma studio file for how i have it set.
Amplifier (there is also a wiring diagram photo) - https://store.sure-electronics.com/product/756
Last edited:
Here's what i came up with for an Auto Source Selection board for JAB5 and more.
Many thanks and credits to EmuMannen for providing those tutorials to get me started.
https://emumannen.blogspot.com/search/label/Tutorial
The attached board takes two source stereo entries and auto fades between them, priority is on the default, which in my case is the Bluetooth input,
but you can adapt it to your needs easily.
So when a BT signal is detected the input crossfades to it, otherwise fades back to Analog.
No external switch or other controls are required.
And if you get to EmuMannen's website, it's really worthy to implement the Logarithmic volume control as well 😉
Many thanks and credits to EmuMannen for providing those tutorials to get me started.
https://emumannen.blogspot.com/search/label/Tutorial
The attached board takes two source stereo entries and auto fades between them, priority is on the default, which in my case is the Bluetooth input,
but you can adapt it to your needs easily.
So when a BT signal is detected the input crossfades to it, otherwise fades back to Analog.
No external switch or other controls are required.
And if you get to EmuMannen's website, it's really worthy to implement the Logarithmic volume control as well 😉