I was sure you were joking because none of these picture is helpful. A clear readable picture of name and values, of said capacitors would greatly help us to help you... 😉
Or, just get similar Nichicon or Panasonic neutral sounding with the same specs/tolerance...
Or, just get similar Nichicon or Panasonic neutral sounding with the same specs/tolerance...
The filter capacitors Panasonic HF or HE 2200uF/16V are always leaky, you have to replace them all. You can use Panasonic FC or Nichicon, Vishay. To keep the looks original use 8200uF/16v Panasonic FC. I think they are the same diameter and length as the 2200uF/16V .
The rail capacitors are ok, just keep them.
The rail capacitors are ok, just keep them.
Have you seen them fail in this series amp? I know that PG had some cap failure issues but I repaired quite a few of these and never saw leaky caps.
Yes the ZPA, M, MS, ZX, Sapphire, till ZX Ti uses this Panasonic serie and they all get leaky after 20-25 years...The electrolitic can distroy the pcb traces, via's or in the worst case got fire. I've recapped a lot af them and is really an issue.