For Sale: Glassware Audio 12VAC Aikido Rev A. Built and tested for 12AU7

[Sadface]

I am selling my built and tested 12VAC Aikido from glassware audio.
https://glass-ware.stores.turbify.net/aikido12vac.html
This is the Revision A version purchased in 2019.

Selling as I have run out of 12AU7's and my mortgage doesn't allow me to purchase more and keep building other things. Thus off this sought after piece goes.
I can provide:
-a pdf scan of the original documentation.
-the 4 CV4003 tubes, one of the right channel ones has gone noisy.
-the extra 20R and 47R 3w MOX resistors for tuning the heater voltage for your particular transformer.

I am asking USD100 + shipping.
I can also provide a 30VA 2x18vac. Configured for 230VAC operation. It could be reconfigured for 115VAC but the leads are short so it would not be easy.
Asking an extra USD15 for the transformer.

I can leave the ground and power leads installed or remove them.
Also I can remove the 5mm pitch screw terminals or leave them on.

Built using high quality parts throughout:
Vishay RN60 resistors except R16 which is an RN65
Wima MKP4 for C1 and C2
EPCOS/TDK polypropylene 2.2uF coupling caps.
Chemicon KYB series 10000 hour 105c caps for C4-C10
Rubycon TXW series 12000 hour 105c cap for C11

 

[Sadface]

Sold!

 

[Ixnay]

That is a really great kit. I have made and sold more than one. Very high quality board.