Hello everyone, please suggest to a newbee whether I can connect five inductors 1H each in order to achieve the required 5 henry of the shematics ??
Thanks
Thanks
You may end up with too much resistance.
Whats wrong with this one?
https://www.digikey.com/en/products/detail/hammond-manufacturing/194F/3869343
Whats wrong with this one?
https://www.digikey.com/en/products/detail/hammond-manufacturing/194F/3869343
What specified current do you need?
This one is cheaper.
https://www.digikey.com/en/products/detail/hammond-manufacturing/156L/454890
This one is cheaper.
https://www.digikey.com/en/products/detail/hammond-manufacturing/156L/454890
Many thanks, I am a newbee and can not calculate but acc to the shematics should be 120 mA. Will attach the scematics in order you to check and advise whether 75 mA will go
Many thanks, I am a newbee and can not calculate but acc to the shematics should be 120 mA. Will attach the scematics in order you to check and advise whether 75 mA will go
Do you think this will do - https://www.aliexpress.com/item/400...KurYxJFH&utparam-url=scene:search|query_from:
Learn to use PSU Designer (https://www.duncanamps.com/psud2/) and you can simulate your power supply and see if the results are acceptable to you.