Hello, i just recently bought a new lanzar htg237 amplifier, which i hope to connect to a "In-phase xt-8" subwoofer driver in a custom box. Just wandering if anyone has every used this amplifier before, and if it runs any good for the price of £60 that i got it for.
Im not sure if it will be somewhat matched to my dual 2ohm coil sub. Internet says it has 300w rms, however im inexperienced and don't know if that means 300w rms per coil, or 300wrms to both coils.
Each of the amplifiers two channels are apparently rated for 2x 225w RMS at 2 ohm. or 1000w MAX at 4 ohm(bridged). So, what could be the best way to wire this up? I think i could either:
Would love any advice, thanks
Im not sure if it will be somewhat matched to my dual 2ohm coil sub. Internet says it has 300w rms, however im inexperienced and don't know if that means 300w rms per coil, or 300wrms to both coils.
Each of the amplifiers two channels are apparently rated for 2x 225w RMS at 2 ohm. or 1000w MAX at 4 ohm(bridged). So, what could be the best way to wire this up? I think i could either:
- wire the left channel to one of the coils, and the right channel to the other coil, making sure that the left and right channel are both at the same phase, this seems a little risky though
- bridge the amplifier channels (they are bridgeable) to get 1000w MAX at 4ohm, then wire both the 2ohm coils to get 4 ohms, and connect that to the bridged 1kw max output.
Would love any advice, thanks