LASE 1201 12" driver

[Egindin]

Folks, I need your advice: is LASE 12 a direct replacement for EVM 12L? If not, how close are the specs? If not, what other 12" driver would be close enough to replace the venerable EVM 12L in a front loaded horn? Thanks to all that responded.

 

[freddi]

FWIW - I just asked for the parameters at Amazon. Didn't know there was a clone. Some of the LASE stuff seems to be made by ZTZ.

 

[wg_ski]

Dont know about the Lase. B&C12PE32 is the most direct replacement I know of. B&C12MH32 is the one I’m using in similar enclosures - more motor and more mass but tuning stays about the same (including in horns).

 

[freddi]

I had 12pe32 in a little Karlson - thieves got it - tvs - guitars - big bandpass box - and a box with Hurst and AR turntable motors - no insurance...

 

[motosapien]

Sounds like thieves with a shopping list freddi. Sorry to hear that.

 

[freddi]

not yet heard on the LASE 12L replacement - saw "97dB" and inherently would not trust it to be like a real 12L for horn use unless can find specs - then they have to be "real" -for horn use - its a pig n' a poke - might be wonderful for a horn - might have relatively reflex qts