I'm building a Nakamichi OMS5 from a couple of parts units. One was dropped and has a major failure in the HLPL 030020 laser assembly - the prism that directs the beam fell off and was sitting in the bottom of the case. I'm curious if anyone out there could repair and realign one of these rare birds so I could have an as new laser - it would be nice to have the diode and photosensor replaced for a fresh start.
Hello, i know this is a little late. I have a Kenwood DP 1100B, it has a Toshiba OPH 34, which is the same laser basically. I also had a failure of the laser of the same kind. The prism just fell. The only solution i found was to replace it with a OPH 31 which is much older, from a donor aurex machine that had a failed cpu.