I was given a pair of Grand High brand tower speakers. After a listen I found a tweeter diaphragm voice coil was broken, I tried to solder the tiny broken voice coil wire without any luck. The trouble is I can't find a replacement tweeter diaphragm anywhere. There is no identifying model anywhere on the speaker boxes except for ''Grand High'', The diaphragm part number is JDD-001-00. The tweeter voice coil measures 2.5cm across and the dome measures 3cm across. Sorry about the crappy photos. Any ideas or suggestions on how I could find one of these?
Attachments
Last edited:
On the back of the plastic I can see there's a number at the top, and some other writing at the bottom.
White van speakers perhaps ???
Probably easier to just swap them out with something that physically fits and worry about altering or adding an resistor later if needed.
White van speakers perhaps ???
Probably easier to just swap them out with something that physically fits and worry about altering or adding an resistor later if needed.
Some of the writing on them is the part#. I think I will just bin them, I was going to fix the speakers and give them away but it's not worth the hassle by the looks. Thanks for the reply mate.
Last edited:
you need to know if it is a 4 ohms or 8 ohms winding but some cheap kit exsist to keep the frame you have, look at AliExpress or Amaon maybe : https://www.amazon.fr/Annadue-Brico...&keywords=tweeter+25mm&qid=1683643867&sr=8-13