I have just finished my ZDT 3.5 project (http://www.zaphaudio.com/ZDT3.5.html), and the extra set of CNC cut baffles I had made are now redundant. I paid $50 for these to be made, so that's what I'm asking for them, plus whatever good packing and shipping cost. (If you are local to Portland, Oregon local pickup is fine too.)
Fit and finish on these is very good. The tweeter especially is properly rebated to be just flush on the front and fits just snugly enough that you could consider skipping screwing them in the rear. There is no slop on any of the driver rebates - a few passes by hand with a bit of sandpaper will open up any wiggle room you'll need.
Just to be absolutely clear, I'm showing the finished speakers so you can see what a finished product can look like. What's for sale is only the set of unfinished baffles, left, right, and center, made of 3/4" MDF.
I won't be surprised if there is no immediate demand for these, so if you find this ad months in the future, don't be discouraged - I'll be storing these properly in the hopes that someone can benefit from these in the future. Get in touch if these interest you, I'd love to save someone else some time.
Fit and finish on these is very good. The tweeter especially is properly rebated to be just flush on the front and fits just snugly enough that you could consider skipping screwing them in the rear. There is no slop on any of the driver rebates - a few passes by hand with a bit of sandpaper will open up any wiggle room you'll need.
Just to be absolutely clear, I'm showing the finished speakers so you can see what a finished product can look like. What's for sale is only the set of unfinished baffles, left, right, and center, made of 3/4" MDF.
I won't be surprised if there is no immediate demand for these, so if you find this ad months in the future, don't be discouraged - I'll be storing these properly in the hopes that someone can benefit from these in the future. Get in touch if these interest you, I'd love to save someone else some time.
Attachments
Last edited: