I have all the parts (except lumber) to build "The New Vifa Tower" as shown on MurphyBlaster Productions website.
Current status of the crossover parts - most of them are already soldered together on the back of a board that the tweeters are mounted on.
You might have to rework these, and the leads are getting pretty short, so it might not be easy.
Woofers are mounted in the lids of blue 5 gal buckets from Lowes. i had a hare brained scheme of making something where the tweeter board was transported INSIDE the same bucket the woofer is mounted on. Upon arrival at "the cabin" the tweeter board would be set on a table top and woofer would remain in a bucket on the floor, or possibly have some type of stand that would hold the bucket in a horizontal position on the table, but that never materialized...
Okay, so the above paragraph is the Bad news,
Good news:
(3) VIFA M21WO-39 woofers, MADE in Denmark, used only a couple minutes, for testing.
(3) VIFA D25AG-35-06 tweeters, MADE in Denmark, used only a couple minutes for testing.
Reason for QTY (3) drivers was originally for if i wanted two Vifa Towers plus one matching Center channel made from the same products, but never happened.
(2) OEM metal grills for the woofers, as you might see in car audio, with plastic trim rings, made precisely for this woofer, by VIFA.
(2) OEM metal grills for the tweeters, same story.
I am willing to let these go at a loss. i have at least $300 into it, and you can have them for ANY kind of OFFER. maybe if you pay shipping and give me a box of donuts?!
Current status of the crossover parts - most of them are already soldered together on the back of a board that the tweeters are mounted on.
You might have to rework these, and the leads are getting pretty short, so it might not be easy.
Woofers are mounted in the lids of blue 5 gal buckets from Lowes. i had a hare brained scheme of making something where the tweeter board was transported INSIDE the same bucket the woofer is mounted on. Upon arrival at "the cabin" the tweeter board would be set on a table top and woofer would remain in a bucket on the floor, or possibly have some type of stand that would hold the bucket in a horizontal position on the table, but that never materialized...
Okay, so the above paragraph is the Bad news,
Good news:
(3) VIFA M21WO-39 woofers, MADE in Denmark, used only a couple minutes, for testing.
(3) VIFA D25AG-35-06 tweeters, MADE in Denmark, used only a couple minutes for testing.
Reason for QTY (3) drivers was originally for if i wanted two Vifa Towers plus one matching Center channel made from the same products, but never happened.
(2) OEM metal grills for the woofers, as you might see in car audio, with plastic trim rings, made precisely for this woofer, by VIFA.
(2) OEM metal grills for the tweeters, same story.
I am willing to let these go at a loss. i have at least $300 into it, and you can have them for ANY kind of OFFER. maybe if you pay shipping and give me a box of donuts?!
