Hello All,
This is my first post. Im following and reading the forum for a couple of months.
Im thinking about doing a speaker ala SCM150A or KH420 with the new
Bliesma mid dome and tweeter (since they spec rather impressive).
1) I know there where SCM150A clones in the past.. is any one working on
a similar project besides the "coffin box"?
2) The KH420 has waveguides. Since is more of a studio use im more interested in
"just" front then wide dispersion. Any thought on this?
3) I heard a 3-Way from Philips with motional feedback, the same speaker with the motional feedback bypassed made a huge
difference in distortion, so for the woofer it would be rather nice i guess. I've also heard the Grimm audio since I was interested in
the bliesma.. but rather prefer a soft mid dome as in the Philips but.. slightly tighter and modern.
4) If find the SCM150A and PSI A25M low end quite nice any thoughts on a woofer like this?
5) I don't want it to sound the same.. but I think choosing the bliesma tweeter and dome "" woofer can get
me (with hard work) in the same kinda ballpark. So any refreshing thought or similar project are welcome!
Thanks.
This is my first post. Im following and reading the forum for a couple of months.
Im thinking about doing a speaker ala SCM150A or KH420 with the new
Bliesma mid dome and tweeter (since they spec rather impressive).
1) I know there where SCM150A clones in the past.. is any one working on
a similar project besides the "coffin box"?
2) The KH420 has waveguides. Since is more of a studio use im more interested in
"just" front then wide dispersion. Any thought on this?
3) I heard a 3-Way from Philips with motional feedback, the same speaker with the motional feedback bypassed made a huge
difference in distortion, so for the woofer it would be rather nice i guess. I've also heard the Grimm audio since I was interested in
the bliesma.. but rather prefer a soft mid dome as in the Philips but.. slightly tighter and modern.
4) If find the SCM150A and PSI A25M low end quite nice any thoughts on a woofer like this?
5) I don't want it to sound the same.. but I think choosing the bliesma tweeter and dome "" woofer can get
me (with hard work) in the same kinda ballpark. So any refreshing thought or similar project are welcome!
Thanks.
Look at this project. https://www.facebook.com/groups/DIYLoudspeakerProjecPad/permalink/1985917465097414/
2) Waveguides help to get more music and less room at the listening positioin. With very close listening positions it's not that important, also with very linear rooms you could live without them. For "normal" listening environments they help. What's your use case?
3) There is not a lot about motion feedback around. Just get your low frequency drivers big/good enough ;-) and put them on the correct spots in the room. Or do some research and build something new and fancy ;-)
2) Waveguides help to get more music and less room at the listening positioin. With very close listening positions it's not that important, also with very linear rooms you could live without them. For "normal" listening environments they help. What's your use case?
3) There is not a lot about motion feedback around. Just get your low frequency drivers big/good enough ;-) and put them on the correct spots in the room. Or do some research and build something new and fancy ;-)