These are 2 of the best measuring 15" midbass woofers, money can buy.
I accumulated these woofers moving forward with my DIY effort but because of the design choices, never found use of them. 1, TD15m and 1 15NMB600 has been used to test Thiele specs. The one AE driver was used to predict whether or not I would move forward with it to complete my project and the one Oberton driver was tested by my DATSv3, free air tested by a mic+REW and placed back in its box, The other woofers were not used at all.
As I write this, I think....am I supposed to sell these??? The problem is I cannot justify buying the 18"s I need to complete my project with 6 - 15"s laying around doing nothing. So here I am.
My offer is, these woofers, at the price I paid for them plus whatever shipping is.... which is $300 less than what you can purchase them for now after prices went up. The AE driver is 649+shipping +how ever long you'd have to wait for AE to produce them and the Oberton woofers aren't even available in the states.
--350usd per AETD15M(16ohm)
--275usd per 15NMB600(8ohm)
I am not even sure I am supposed to sell the 16ohm version of the TD15m since I am fortunate to have been able to get them in the first place. Normally a large order is required for special runs of this woofer, as the 16ohm version is not offered. The lighter 16ohm voice coil increases HF sensitivity. This thing sounds almost Full Range....The 15NMB600 is an equally impressive woofer that has been described by some as the best measuring woofer they've found.
http://www.loudspeakerdatabase.com/Oberton/15NMB600
http://www.loudspeakerdatabase.com/AE/TD15M#8Ω
I accumulated these woofers moving forward with my DIY effort but because of the design choices, never found use of them. 1, TD15m and 1 15NMB600 has been used to test Thiele specs. The one AE driver was used to predict whether or not I would move forward with it to complete my project and the one Oberton driver was tested by my DATSv3, free air tested by a mic+REW and placed back in its box, The other woofers were not used at all.
As I write this, I think....am I supposed to sell these??? The problem is I cannot justify buying the 18"s I need to complete my project with 6 - 15"s laying around doing nothing. So here I am.
My offer is, these woofers, at the price I paid for them plus whatever shipping is.... which is $300 less than what you can purchase them for now after prices went up. The AE driver is 649+shipping +how ever long you'd have to wait for AE to produce them and the Oberton woofers aren't even available in the states.
I am not even sure I am supposed to sell the 16ohm version of the TD15m since I am fortunate to have been able to get them in the first place. Normally a large order is required for special runs of this woofer, as the 16ohm version is not offered. The lighter 16ohm voice coil increases HF sensitivity. This thing sounds almost Full Range....The 15NMB600 is an equally impressive woofer that has been described by some as the best measuring woofer they've found.
http://www.loudspeakerdatabase.com/Oberton/15NMB600
http://www.loudspeakerdatabase.com/AE/TD15M#8Ω
Last edited:
2 virtually new woofers with 16ohm voicecoils for 300/1pc less than brand new price....
2 brand new woofers for 163/1pc, less then current new cost plus, located in US so shipping is down considering they are sold here....
2 brand new woofers for 163/1pc, less then current new cost plus, located in US so shipping is down considering they are sold here....