• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

WTB Looking for W-Input board from Tomi Nihtila

Wanted to buy
hi, have two if You are interested - i'm from Poland.
also have spares W-BB PSU and W-BB Dual PSU

regards,
ML
 

Attachments

  • w-input.jpg
    w-input.jpg
    501.1 KB · Views: 91
  • Like
Reactions: Prodigy85
i agree .. i was in touch with Tomi himself, but he says he is unable to produce anymore AKM based boards due to unavailability..
I am so badly waiting for someone here to come up with a very nice input module that can be used in all our DIY dac builds.
 
It appears that is software controlled but also shows a switch. Its unclear how that switch works.
OP1 short shows auto selection on Coax/optical but not sure how I2s input works

6.Key switch for input conversion, with memory, there are two modes:
OP1 open -> select coaxial 1/coaxial 2/optical/I2S input respectively
OP1 short circuit (default) ----> coaxial 1/coaxial 2/optical automatic selection and I2S input
7. LED light or display screen display choice
OP2 open circuit (default) ----> display
OP2 short circuit---->LED light, that input will light up the LED of that way