Hi Folks,
Well, it's a bit of a long shot but I wonder if anyone has had this issue before or might know of a solution or way to diagnose further? Here's the problem:
Turn on the unit at the wall Red LED slow blinks:
This device was a gift for a friend and has been working admirably for more than a year ... naturally it's on me to find a solution 🙂 I have emailed 3e Audio (@3eaudio) on the gmail address I have used in the past but had no reply this time.
I have a USBi programmer from another project but wary of making the problem worse - though with a broken device and no other options dont really have anything to lose. Any advice on best way to proceed would be much appreciated.
Thanks!
Will.
Well, it's a bit of a long shot but I wonder if anyone has had this issue before or might know of a solution or way to diagnose further? Here's the problem:
Turn on the unit at the wall Red LED slow blinks:
- If i press volume in the red light goes off and wont come back on without powering off for a few seconds at the wall
- If i press once quickly then long press the red light stays blinking
- Line in doesn't do anything
- Can get th lights around the volume knob to turn on at all
This device was a gift for a friend and has been working admirably for more than a year ... naturally it's on me to find a solution 🙂 I have emailed 3e Audio (@3eaudio) on the gmail address I have used in the past but had no reply this time.
I have a USBi programmer from another project but wary of making the problem worse - though with a broken device and no other options dont really have anything to lose. Any advice on best way to proceed would be much appreciated.
Thanks!
Will.