I would think so but you need to force the PS to full duty cycle to confirm that the FETs don't run hot at idle. The 51 ohm resistors could be marginal.
How to run it in full duty cycle. I installed these before and the amp came back blowing power fets. So I want to know if it was these fets cause failure or the customer made a mistake. I also have HUF75344P3 instead HUF75344G3 package different. Can I use it instead IRFP064N? I have changed driver transistors l.
Weren't the HUF the originals?
Contact Rockford to get the right diagram if you don't know what the originals were.
If the supply isn't at full duty cycle, reduce the 12v supply voltage and the duty cycle will increase.
Contact Rockford to get the right diagram if you don't know what the originals were.
If the supply isn't at full duty cycle, reduce the 12v supply voltage and the duty cycle will increase.