Radia Pro 1.9 Build

Hello all. First post on the forum. Im hoping to get some help with a dream build for my home theater from others more knowledgable than myself. I am lucky enough to have access to 5-7 Radia Pro 1.9 75 inch planar drivers and 24 x Faital 6FE100 6.5" woofers. My plan is to build a baffle wall with angled corners behind an acoustically transparent false wall and screen, with a 75" planar and 8 x 6.5" for each of the LCR. Determining cabinet volume, amplifier power, xover settings, etc are a bit over my head at this point but I am learning. I was planning to buy a VTV 6ch amp with the Hypex NC502PM modules, but Im not 100% sure it its enough power for 8x6.5" on one channel. I should have enough DSP channels for a bi-amped LCR. The goal is to eventually add 2-4 rear channels using the 75" planars and possibly a single 10-12" woofer per speaker. Anyway, this will take some time to purchase the amplification, AT projection screen, and building materials. But I plan to share the process once the build gets started. Any advice anyone could give along the way with the details would be greatly appreciated. Thanks in advance!

 
No advise yet, except to say that the Hypex Ncore all-in-one modules are great. Easy to use and sound very good. I'm driving a set of Quad 2912's with a pair of NC250MP's and they are very impressive. Seriously considering buying a Cambridge Audio EVO150 which uses a NC252MP.

Sheldon