• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Drivers for Line Arrays

I bought a bunch of drivers for doing some line arrays based on the work of Don Keele about 10 years ago. I’ve got a bunch of 1” “full range” drivers that were used in Part Express’ version as well as a case of the 3” Tang Band titanium cone niobium drivers. I also have a bunch of good 6 1/2 mid-woofers. I have the data at home, but don’t remember the specifics. Open to serious offers. I’m looking for Econowave crossovers.
 

Attachments

  • IMG_2795.jpeg
    IMG_2795.jpeg
    284.6 KB · Views: 76
  • IMG_2796.jpeg
    IMG_2796.jpeg
    345.3 KB · Views: 75
I had asked for a PM with offers, but this isn't happening. The drivers cost me about $50 a piece. I'm going to do some research and post a price.
All the drivers are new and unused.

I will sell the Tang Band 3" for $16 each or 8 or more for $12 each. PE currently sells a Tang Band 3" with the same niobium motor but with paper cone instead of titanium for $46 each. Also actual shipping costs including packing materials if I have to buy them. I'll try to use what I have first.

I will sell the little half inch tweeters for $1 each (10 for $10) in packs of ten (minimum order two packs) or all of them (160) for $100. I saw a saved web page that said the PE closeout price was $16 for 10. Actual shipping costs including packing materials if I have to buy them.

I will sell the Aura 6" woofers: NS6-255-8A for $18 each, 10 for $160, or a case of 30 for $450. Parts Express did a closeout at $23 each according to a cached web page, so that's probably what I paid. Actual shipping costs including packing materials if I have to buy them.

Those are my thoughts. Please send offers by private message.