I might use an Elekit TU8200R in my 4-way active speaker system to drive either the midrange driver or tweeter (or both??), with sensitivities of 91-93 dB. Given its limited frequency response for either of these drivers, power won’t be much of a problem. I currently use the Amp Camp Kit for the tweeters.
I have some questions about Elekit upgrades:
1- What advantages do the Lundahl l transformers provide over the stock Japanese ones?
2- Are there any capacitor upgrades that are worthwhile?
3- Given that this amp will not see anything low frequency, are there output tubes other than the 6L6 that would be exceptional in the midrange and higher frequencies?
Long ago, all I had were tube kit products, mostly Dynakits, and I have a need to hear that sound, again. It’s been too long without. Sorry if my questions are inane.
Thanks and Regards, Mike (michiganmike711)
I have some questions about Elekit upgrades:
1- What advantages do the Lundahl l transformers provide over the stock Japanese ones?
2- Are there any capacitor upgrades that are worthwhile?
3- Given that this amp will not see anything low frequency, are there output tubes other than the 6L6 that would be exceptional in the midrange and higher frequencies?
Long ago, all I had were tube kit products, mostly Dynakits, and I have a need to hear that sound, again. It’s been too long without. Sorry if my questions are inane.
Thanks and Regards, Mike (michiganmike711)