Trying to use 1/4 inch and 1 inch microphone capsules without actually soldering. I would like to buy UA0035 which is an adapter to go from 1/4 in capsule to 1/2 in preamp and DB0375 (adapter for 1 inch capsule to 1/2 inch preamp).
In the end, I will be building my own preamp, so I can make do with a broken preamp or just about any broken socket or extension piece. I believe GRAS, Rion and some Neumann sockets will work, too.
The capsules are listed at 5.7 mm 60UNS thread and 23.11 mm 60UNS thread.
Thanks
In the end, I will be building my own preamp, so I can make do with a broken preamp or just about any broken socket or extension piece. I believe GRAS, Rion and some Neumann sockets will work, too.
The capsules are listed at 5.7 mm 60UNS thread and 23.11 mm 60UNS thread.
Thanks
I don’t know anything abou tthe connectors but i do know a guy with a wall of B&K stuff. He will know.
Bill at PEARL in Calgary.
I have an email and probably a phone number if you can’t find him.
dave
Bill at PEARL in Calgary.
I have an email and probably a phone number if you can’t find him.
dave
Dave, much appreciated. I think I have come across old B&K manuals on PEARL-Hifi, that's him? Shipping from Canada has become a bit of a headache though.
Krysiaska, looking forward!
Krysiaska, looking forward!
Yes, that would be Bill… his legacy will be all the work he has done digitizing historical audio documents.
For something small like this canada Post has small packet post that means it can be shipped to anywhere in the world cheaper than almost anywhere in Canada. If package under 250g it will be about $12.
dave
For something small like this canada Post has small packet post that means it can be shipped to anywhere in the world cheaper than almost anywhere in Canada. If package under 250g it will be about $12.
dave