Hello,
I have for sale my Salas Ultra BIB V1.3.
The pcbs were drawn by Eric06(from the ugs muse group buy) and assembled by me.
Each pcb hosts a positive and a negative shunt regulator
The ccs is set for 260ma, I powered them up with 35v and set for 28v on the output.
They worked like this a year in my ugs preamp.
I sell them because I drawn the same design on an aluminum pcb, fully smd, which I can connect thermally directly to the enclosure, saving on the heatsinks.
Sold
I have for sale my Salas Ultra BIB V1.3.
The pcbs were drawn by Eric06(from the ugs muse group buy) and assembled by me.
Each pcb hosts a positive and a negative shunt regulator
The ccs is set for 260ma, I powered them up with 35v and set for 28v on the output.
They worked like this a year in my ugs preamp.
I sell them because I drawn the same design on an aluminum pcb, fully smd, which I can connect thermally directly to the enclosure, saving on the heatsinks.
Sold
Attachments
Last edited:
Can I adjust these to output +/- 12V to pair with the dam2021? Also, what do you use to feed the DC in?
I'm interested bc I saw these used in a high quality dam2021 custom build.
Also can you ship to the US?
I'm interested bc I saw these used in a high quality dam2021 custom build.
Also can you ship to the US?
Hello @Hisma
The shunt regs can be setup to give +/-12v@260ma, even higher current is possible but you would need to change the ccs resistor.
Do you know how much current is your dac drawing?
I have used batteries at the beginning and after I bought a Toroidy supreme transformer that I still use with a newer version of these regs.
If you aren’t afraid of a bit of smd soldering I do have some aluminum pcbs for sale for the same regs, please check my other sale threads.
I can ship, no problem. Please send me your shipping details through a private message so I can calculate the shipping price.
Do you need also the heatsinks?
The shunt regs can be setup to give +/-12v@260ma, even higher current is possible but you would need to change the ccs resistor.
Do you know how much current is your dac drawing?
I have used batteries at the beginning and after I bought a Toroidy supreme transformer that I still use with a newer version of these regs.
If you aren’t afraid of a bit of smd soldering I do have some aluminum pcbs for sale for the same regs, please check my other sale threads.
I can ship, no problem. Please send me your shipping details through a private message so I can calculate the shipping price.
Do you need also the heatsinks?
Thank you. That output will suffice for the dam1021.
Yes I will need some form of heatsink so I'll take it.
I'd prefer to have a fully assembled board.
I cannot private message you directly, probably because my account is too new. Can you please PM me instead and I can share my details?
Thanks!