Ah, now this should do the trick! 😀
https://www.trcelectronics.com/mean-well-power-supply-shp-10k-hv
The 55V model can be adjusted down to under 50V. Perfect for powering a multi-channel amp consisting of N TPA3255 in PBTL mode (each can deliver 480W mono into 2R). On paper, this is good for powering 20 channels or so, with a little headroom to spare!
https://www.trcelectronics.com/mean-well-power-supply-shp-10k-hv
The 55V model can be adjusted down to under 50V. Perfect for powering a multi-channel amp consisting of N TPA3255 in PBTL mode (each can deliver 480W mono into 2R). On paper, this is good for powering 20 channels or so, with a little headroom to spare!
Question is if a more distributed power solution is better. I'm thinking 10 (or 5?) PSUs (2/4ch on each) rather than putting all eggs in the same basket...
A big consumer could ruin the day for it's neighbours....
//
A big consumer could ruin the day for it's neighbours....
//
