Hello,
I've had my Adam A7X pair for about 8 years and one of the transformers just gave up. I sent it to my regular technician to try a recoil, but it seems like this is way more difficult than expected so I'll need to get a new transformer. The local distributor has changed hands a few times, so the new distributors don't seem too inclined to help much, since I did not buy the unit from them.
Would anyone know where I can buy a replacement transformer for an A7X?
For context, I live in Malaysia, so there aren't really a lot of options and will probably have to buy either recondition on ebay or from someone overseas and have it shipped.
Thanks in advance!
I've had my Adam A7X pair for about 8 years and one of the transformers just gave up. I sent it to my regular technician to try a recoil, but it seems like this is way more difficult than expected so I'll need to get a new transformer. The local distributor has changed hands a few times, so the new distributors don't seem too inclined to help much, since I did not buy the unit from them.
Would anyone know where I can buy a replacement transformer for an A7X?
For context, I live in Malaysia, so there aren't really a lot of options and will probably have to buy either recondition on ebay or from someone overseas and have it shipped.
Thanks in advance!
there is a guy at Sim Lim tower in Singapore who do rewind transformers, maybe he is still there at the third floor..
Thanks @TonyTecson. I've just sent it to the new distributor in Malaysia for repair. If they want to charge an arm and a leg I may take the transformer down to Sim Lim in Singapore on my next trip down.
ADAM transformer precautions here :
https://www.diyaudio.com/community/...-schematic-diagrams-help.284017/#post-5960791
https://www.diyaudio.com/community/...-schematic-diagrams-help.284017/#post-5960791
Not sure whether I need a PSU as well for my Adam A7X near field monitors? It’s blowing the fuse straight away, any ideas what this could be? I have access to professional surface mount reworking repair equipment but need to diagnose the fault 1st. Thx
I have a pair of Adam A7X i bought used about a month ago, recently whilst mixing one of the speakers just turned off and wouldn’t power on, i checked the fuse and it had blown so i ordered the same but new fuses (T1.6A 240V). I swapped round the bad for good and powered on. It flashed on for a second then turned off again, so i checked the fuse and once again it had blown. I repeated this step a couple of times and it kept happening. I tried swapping plugs and fuse round from the one that was fine to get no success . If anyone has any ideas that would be great. I will try taking it to an audio repair shop and post if i get any further.
I suspect a short in the transformer due to the mounting issues mentioned in this forum before.
damage in rectifier, supply capacitors and circuitry is less likely. You can not fix this by destroying
fuses.
damage in rectifier, supply capacitors and circuitry is less likely. You can not fix this by destroying
fuses.
