Finished these speakers tonight and thought I’d share the grills since I haven’t seen this done before.
Used #10 spax screws because they have a large flat top to mate up with the neo magnets I got from Amazon (1/2” x 3mm). Black magnets to hide better.
Bonus tip: put some blue painters tape under your driver mounting area and it will come back out easily in the future. Did this under the WG as well.
Used #10 spax screws because they have a large flat top to mate up with the neo magnets I got from Amazon (1/2” x 3mm). Black magnets to hide better.
Bonus tip: put some blue painters tape under your driver mounting area and it will come back out easily in the future. Did this under the WG as well.
Ha, definitely looks better without the grill. But that cone is really thin and I have a kid and a dog. Grill looks better than a big hole. And with this setup I can easily remove the grill if I wanted. Basement is dimly lit so they mostly go unnoticed.
I had grill-less speakers until the cat decided to use a bass cone to sharpen its claws. Cat survived. Cone didn't. Grills good.
