Hypex UcD250 hookup

[Listen]

Dear DIYers,

I am trying to hookup a Hypex UcD250lp-m and not getting any throughput. Here is the pinout I am using.

1,3 => -30v dc
2,4 => +30v dc
5 => amplifier ready output reads -0.7v
6 is tied to 7 with a 4.7k ohm resistor
8 =>
9 => RCA core
10 => RCA shield (not tied to ground)
11, 13 => speaker hot
12, 14 => ground (speaker return)
15, 16 =>

I have attached the manual.

Happy listening,

John

 

[Listen]

Turns out that pin 6 it doesn't want a pulldown resistor, it wants to be tied to ground period. Palm to forehead.

John