I would like to ask where can i find some good cabinet plans for Mark Audio Alpair 10 and 11 MS or MAOP series.
Thank you
Thank you
Quite the list, are you only interested in current drivers?
Pensils, Frugel-Horns, Woden (many many ML-TLs, reflex, DCR https://www.diyaudio.com/community/...-mark-audio-fostex-tb-dayton-seas-etc.323051/), Mar-Kens, waxx has a bice ML-TL for CHN-110, Jim Griffin ML-TL for A10s, Some internal Mark Ausio designs (i would avoid), but they have also published quite a few of Scott’s (Woden) preliminary drawings.
dave
Pensils, Frugel-Horns, Woden (many many ML-TLs, reflex, DCR https://www.diyaudio.com/community/...-mark-audio-fostex-tb-dayton-seas-etc.323051/), Mar-Kens, waxx has a bice ML-TL for CHN-110, Jim Griffin ML-TL for A10s, Some internal Mark Ausio designs (i would avoid), but they have also published quite a few of Scott’s (Woden) preliminary drawings.
dave
Well just looking what would be the best bang for the buck and i really like Mark Audio Drivers. If there is anything else you can also make a suggestion.
Would cabinet plans that are made for 10P series drivers also work for MS and MAOP series and 11?
Thanks
Would cabinet plans that are made for 10P series drivers also work for MS and MAOP series and 11?
Thanks
Not usually. Cabinets, except for some horns, tend to be fairly specific.
I would say, from my experience, CHN-110 (Joan or FHXL) represents one of the best values in FR drivers.
MS & MAOP represent the high end.
dave
I would say, from my experience, CHN-110 (Joan or FHXL) represents one of the best values in FR drivers.
MS & MAOP represent the high end.
dave
You can get few option from https://www.frugal-phile.com/boxes-markaudio.html
My Alpairs 10.3M stand-mounts are based on the design from the above link : "
My Alpairs 10.3M stand-mounts are based on the design from the above link : "
- Classic Golden Ratio Mar-Ken10.3/10p for Alpair10.3/Alpair10p"
I typically make a free version of the CGRs for each driver available free. More comprehensive plans and more advanced bixes cost a token amount.
dave
There are many, but IMO the MA tend to stand out. They do have some less “illustrious” drivers.
I like some Fostex FFxxwk, SEAS FA22, Visaton B200 (both of those 8” need phase plugs), some decent vintage surprises, but many more that suffer from one or more objectionabe “features” (which can be different for each listener), but there are so many now it is not possible to try to sample everything.
dave
I like some Fostex FFxxwk, SEAS FA22, Visaton B200 (both of those 8” need phase plugs), some decent vintage surprises, but many more that suffer from one or more objectionabe “features” (which can be different for each listener), but there are so many now it is not possible to try to sample everything.
dave
The enclosure largely only affects the bass. The Pensil goes lower. So above about 200 Hz, except for differences in diffraction, wil sound the same. CGR might be a bit more articulate.
dave
dave
Hmm considering just building Pluvia7HD are there any good cab plans for those? I already got those from the markaudio website.