Is the MS2125 diagram of any help?
https://elektrotanya.com/showresult?what=phoenix gold M1&kategoria=&kat2=all
They seem to like to have a 33uF@16v cap at the input of the power amplifier. Is that true for this amp?
Resistor power ratings are typically based on size except for special miniaturized resistors that are rated for very high temperatures. I think these are likely just normal flameproof resistors so size should tell you the power rating.
https://elektrotanya.com/showresult?what=phoenix gold M1&kategoria=&kat2=all
They seem to like to have a 33uF@16v cap at the input of the power amplifier. Is that true for this amp?
Resistor power ratings are typically based on size except for special miniaturized resistors that are rated for very high temperatures. I think these are likely just normal flameproof resistors so size should tell you the power rating.
Thank you Perry, I don't want remove gain control, but only all the filter circuit.
I have to check signal with a scope.
I think resistors are 5 watt, but I have other 5watt wirewound resistors and are small than the original.
I have to check signal with a scope.
I think resistors are 5 watt, but I have other 5watt wirewound resistors and are small than the original.