I'm building an M2X amp. I need a pair of speaker posts, but searching for "speaker post", "speaker terminal", "speaker jack" on mouser, digikey, and don audio, isn't giving me anything useful.
The ones in the amp camp amp would be fine, see step 4
https://guides.diyaudio.com/Guide/Amp+Camp+Amp+V1.6+Build+Guide/5?lang=en#s132
if someone has a brand that they think is better, I'm all ears.
The ones in the amp camp amp would be fine, see step 4
https://guides.diyaudio.com/Guide/Amp+Camp+Amp+V1.6+Build+Guide/5?lang=en#s132
if someone has a brand that they think is better, I'm all ears.
Some progress:
https://www.digikey.lu/en/products/filter/banana-and-tip-connectors-binding-posts/310
still haven't found the amp camp posts, but there are other options
https://www.digikey.lu/en/products/filter/banana-and-tip-connectors-binding-posts/310
still haven't found the amp camp posts, but there are other options
These are instrument quality tellurium copper.
https://www.digikey.lu/en/products/detail/pomona-electronics/3770-2/736561
https://www.digikey.lu/en/products/detail/pomona-electronics/3770-0/736559
https://www.digikey.lu/en/products/detail/pomona-electronics/3770-2/736561
https://www.digikey.lu/en/products/detail/pomona-electronics/3770-0/736559
Hard to go wrong with Pomona.
WBT Next Gen, ETI cable pods at the pricey end, i tend to use these: https://www.partsconnexion.com/CONNEX-53464.html
https://www.partsconnexion.com/binding-posts.html
I would recommend something with little metal, the big solid copper ones suck IMO, i would love to change the ones on my SIT-3.
dave
WBT Next Gen, ETI cable pods at the pricey end, i tend to use these: https://www.partsconnexion.com/CONNEX-53464.html
https://www.partsconnexion.com/binding-posts.html
I would recommend something with little metal, the big solid copper ones suck IMO, i would love to change the ones on my SIT-3.
dave
Thanks, everyone!
I've also found some prior threads:
https://www.diyaudio.com/community/...-copper-does-really-makes-differences.228848/
https://www.diyaudio.com/community/threads/loudspeakers-binding-posts.228556/
I've also found some prior threads:
https://www.diyaudio.com/community/...-copper-does-really-makes-differences.228848/
https://www.diyaudio.com/community/threads/loudspeakers-binding-posts.228556/
Those could be cheap steel versions - you want brass for no ferromagnetic distortion in the high current path ideally. A magnet will quickly distinquish the steel from the brass terminals.
