HI all,
there are 4 User-changable Resistors in the X2 Preamp.
Standard Value is 220 Ohm each, the higher the resistors the lower the gain.
As i need some more gain, can i replace that 220 Ohm resistors with some wire
without damaging anything?
have a nice day
Carsten
there are 4 User-changable Resistors in the X2 Preamp.
Standard Value is 220 Ohm each, the higher the resistors the lower the gain.
As i need some more gain, can i replace that 220 Ohm resistors with some wire
without damaging anything?
have a nice day
Carsten
Carsten,
If you are considering modifying a commercial unit then I suggest first contacting customer service at Pass Labs.
Let them know what you are hoping to do and the serial number of the unit (in case there were different circuit/pcb
revisions)
Dennis
If you are considering modifying a commercial unit then I suggest first contacting customer service at Pass Labs.
Let them know what you are hoping to do and the serial number of the unit (in case there were different circuit/pcb
revisions)
Dennis