I am needing to clear some space, so I am reluctantly sellling a pair of Le Cleach elliptical horns, which can be crossed as low as 300hz I crossed them at 350hz. They are designed for a 2” throat with adaptor plates. Plate allows you to mount the driver onto the back of the horn. They also come with cradle stands. These are big horns, I didn’t realise how big when I got JMCL to generate the profile for me. They are 850mm wide, 550mm tall and 690vmm deep. Ended up being to big for my room to integrate well. The plan of keeping them, until we moved house to one with a bigger music room, reality this isn’t going to happen.
The rolled lip was truncated on the bottom side to reduce the Centre to Centre height slightly. They are made from birch ply and are 40mm thick, weighting over 20 kg each. They are finished in a metallic gold colour. They were hand sprayed and finished, so not a automotive level of finish, and have some damage to the finish on edges etc from moving/storage. Realistically need a respray, as gold isn’t everyone taste.
Looking for £700 Ono for the pair with stands and adaptor plates. I am located near Nottingham, so willing to travel an hour or so to meet half way.
Further pictures and info.. just ask.
The rolled lip was truncated on the bottom side to reduce the Centre to Centre height slightly. They are made from birch ply and are 40mm thick, weighting over 20 kg each. They are finished in a metallic gold colour. They were hand sprayed and finished, so not a automotive level of finish, and have some damage to the finish on edges etc from moving/storage. Realistically need a respray, as gold isn’t everyone taste.
Looking for £700 Ono for the pair with stands and adaptor plates. I am located near Nottingham, so willing to travel an hour or so to meet half way.
Further pictures and info.. just ask.