Hi, I need to have as much input as possible below 90Hz.
I have to use 4 subwoofers per side, I cannot carry big and heavy things (we will use the system in establishments with stairs, platforms, sand etc.)
These are my ideas:
1) I currently have 3 tham 15 mk2 per side, but they are not enough, I can build 2 more tham15 and get to 4 tham 15 per side
https://www.martinsson.cc/blog/images/THAM15MKII_BUILD.JPG
2) I have 8 turbosound tsw118 witheout driver (I don't know if the exact name, but it is the sub with the curve, ie identical to the lower part of the tms4) I could put the recommended PD cones with 4 "coil but many speak of poor efficiency at the bottom, Does this problem exist even in groups of 4?
https://i.ytimg.com/vi/OWuLN5mF_NE/maxresdefault.jpg
3) build tham 18
https://i.ytimg.com/vi/oisGNpC3M0A/hqdefault.jpg
4) build the new paraflex, but in compact versions. both from 15 and from 18
https://i.ytimg.com/vi/KRdBzvFJtY4/maxresdefault.jpg
5) recommend something suitable for the purpose 🙂
--- consider that the dimensions of a cerwin vega L36 are already too much: D ---
in short, which one makes more from 90 hz down, I don't need 20hz but an extended response up to 35 / 40hz pretty powerful!
I have already tried to ask but it creates a lot of confusion that top speakers use, etc etc ..
if you have simulations they are welcome!
thank you all!
I have to use 4 subwoofers per side, I cannot carry big and heavy things (we will use the system in establishments with stairs, platforms, sand etc.)
These are my ideas:
1) I currently have 3 tham 15 mk2 per side, but they are not enough, I can build 2 more tham15 and get to 4 tham 15 per side
https://www.martinsson.cc/blog/images/THAM15MKII_BUILD.JPG
2) I have 8 turbosound tsw118 witheout driver (I don't know if the exact name, but it is the sub with the curve, ie identical to the lower part of the tms4) I could put the recommended PD cones with 4 "coil but many speak of poor efficiency at the bottom, Does this problem exist even in groups of 4?
https://i.ytimg.com/vi/OWuLN5mF_NE/maxresdefault.jpg
3) build tham 18
https://i.ytimg.com/vi/oisGNpC3M0A/hqdefault.jpg
4) build the new paraflex, but in compact versions. both from 15 and from 18
https://i.ytimg.com/vi/KRdBzvFJtY4/maxresdefault.jpg
5) recommend something suitable for the purpose 🙂
--- consider that the dimensions of a cerwin vega L36 are already too much: D ---
in short, which one makes more from 90 hz down, I don't need 20hz but an extended response up to 35 / 40hz pretty powerful!
I have already tried to ask but it creates a lot of confusion that top speakers use, etc etc ..
if you have simulations they are welcome!
thank you all!
You already have one active thread on this subject. Please do not start multiple threads on the same topic.- Status
- Not open for further replies.