I unfortunately broke a speaker binding post (red) on my ROTEL RB-1590. ROTEL's parts webpage shows the terminals, however, ROTEL will not sell the binding posts and require the amp to be sent to a repair facility. The part number is: C-4717A01.
Hopefully someone can recommend where I can find the part new or used.
Thanks for reading!
Hopefully someone can recommend where I can find the part new or used.
Thanks for reading!
Attachments
Hmmm....
I had a RB-1090 that went belly up several years ago but I salvaged most of the good parts. I might have a set of binding posts hiding somewhere. Are you in the USA?
I had a RB-1090 that went belly up several years ago but I salvaged most of the good parts. I might have a set of binding posts hiding somewhere. Are you in the USA?
Here in the UK I hounded our NAD distributor for an unusual pair of binding posts. The key to gaining their cooperation is the 'right to repair' legislation that's come into force here recently. You can just tell them about it and that they should be trying to comply with the spirit of this law, even if it's not mandatory. Perhaps the same argument would work for Rotel too?
They look awfully similar to these:
https://www.parts-express.com/Dayton-Audio-BPFI-G-Fully-Insulated-Binding-Post-Pair-Gold-091-630
If you cannot find a source of the originals, I have a DIYaudio chassis with the dayton binding posts and I have a Rotel RB-1070. I can take a comparison pick. Let me know if you need it and I can dig the Rotel out. Best of luck!
https://www.parts-express.com/Dayton-Audio-BPFI-G-Fully-Insulated-Binding-Post-Pair-Gold-091-630
If you cannot find a source of the originals, I have a DIYaudio chassis with the dayton binding posts and I have a Rotel RB-1070. I can take a comparison pick. Let me know if you need it and I can dig the Rotel out. Best of luck!
Hi RikBird,
Just cover the shipping cost.
PM me your shipping info, probably best option is small flat rate USPS box.
Just cover the shipping cost.
PM me your shipping info, probably best option is small flat rate USPS box.
Vunce,
Payment, as we talked about, was made yesterday. Thanks for saving my amp from having a non-OEM terminal repair. It was either that or send an 85lb package off to a repair center.
Thanks to the others who offered advice and suggestions; I really appreciate it.
Payment, as we talked about, was made yesterday. Thanks for saving my amp from having a non-OEM terminal repair. It was either that or send an 85lb package off to a repair center.
Thanks to the others who offered advice and suggestions; I really appreciate it.
Yes, received, Thank you RBR!
Glad this worked out for you. These Rotel amps are beasts! Definitely would not want to ship it anywhere.
Wish you luck with a successful repair 👍
Glad this worked out for you. These Rotel amps are beasts! Definitely would not want to ship it anywhere.
Wish you luck with a successful repair 👍
Hi,
I was wondering if someone could answer a quick question about replacing these Rotel speaker Binding Posts. Is it a easy as unscrewing them, removing them a screwing in the new set? Or is there more involved and requires more knowledge?
I have a Rotel RA-02, and I prefer to bare wire my speaker connections. I've never liked the binding post on this integrated amp and it looks like an easy upgrade. I love the speaker binding posts on my RX-1052 (similar to the post in the pictures above), and would love to have the same terminals on the RA-02.
If anyone knows if this is an easy switch, please let me know.
I know this is an old thread, but any help would be great.
Thank you,
Daivd
I was wondering if someone could answer a quick question about replacing these Rotel speaker Binding Posts. Is it a easy as unscrewing them, removing them a screwing in the new set? Or is there more involved and requires more knowledge?
I have a Rotel RA-02, and I prefer to bare wire my speaker connections. I've never liked the binding post on this integrated amp and it looks like an easy upgrade. I love the speaker binding posts on my RX-1052 (similar to the post in the pictures above), and would love to have the same terminals on the RA-02.
If anyone knows if this is an easy switch, please let me know.
I know this is an old thread, but any help would be great.
Thank you,
Daivd