For sale,
Parts removed from various Denon AVC amplifiers (AVC A10SE and A11SR x 2)
Amplifiers were decomishioned for various reasons, all these parts were 'known good'. The aim was to build some power amplifiers but I won't have time for decades so a chance for someone else to acquire some great quality gear.
Included:
One linear PSU stage from A10SE - not sure if this board has all the regulators and diodes on it or just caps
One linear PSU stage from A11SR7
two sub power boards with smaller transformers from A11SR (power for digital electronics)
3 torroidal PSU's, 2 matching one visually different.
one 5 channel power amplifier from AVC A10Se
Two amplifier strips from A11SR.
Voltage of PSU's was about +69V/0/-69V if iirc.
Plenty here to make some very nice amps.
Any questions give me a shout.
Looking for £200 for everything inc. postage to UK. No international sales due to weight and hassle.
Payment by Paypal for goods and services. Will be VERY well wrapped.
Due to the nature of what is being sold I will need you to demonstrate some simple electrical safety before completing the sale, not being facetious; I don't want anyone to zap themselves unnecessarily.
thanks all.
Parts removed from various Denon AVC amplifiers (AVC A10SE and A11SR x 2)
Amplifiers were decomishioned for various reasons, all these parts were 'known good'. The aim was to build some power amplifiers but I won't have time for decades so a chance for someone else to acquire some great quality gear.
Included:
One linear PSU stage from A10SE - not sure if this board has all the regulators and diodes on it or just caps
One linear PSU stage from A11SR7
two sub power boards with smaller transformers from A11SR (power for digital electronics)
3 torroidal PSU's, 2 matching one visually different.
one 5 channel power amplifier from AVC A10Se
Two amplifier strips from A11SR.
Voltage of PSU's was about +69V/0/-69V if iirc.
Plenty here to make some very nice amps.
Any questions give me a shout.
Looking for £200 for everything inc. postage to UK. No international sales due to weight and hassle.
Payment by Paypal for goods and services. Will be VERY well wrapped.
Due to the nature of what is being sold I will need you to demonstrate some simple electrical safety before completing the sale, not being facetious; I don't want anyone to zap themselves unnecessarily.
thanks all.
Attachments
-
IMG_20220130_114733.jpg507.8 KB · Views: 191
-
IMG_20220130_115017.jpg313.8 KB · Views: 164
-
IMG_20220130_115044.jpg351.4 KB · Views: 166
-
IMG_20220130_115051.jpg435.9 KB · Views: 174
-
IMG_20220130_115110.jpg356.2 KB · Views: 161
-
IMG_20220130_115225.jpg454.5 KB · Views: 167
-
IMG_20220130_115319.jpg491.3 KB · Views: 175
-
IMG_20220130_115543.jpg554 KB · Views: 180
Where abouts are you based? (I'm in the UK and looking for some toroidal transformers)
Do you know the DCR of the secondaries? Also are they 67-0-67 or 67-0 0-67 with two separate lead outs for the secondaries?
Do you know the DCR of the secondaries? Also are they 67-0-67 or 67-0 0-67 with two separate lead outs for the secondaries?
Last edited:
Based in oxfordshire, though I travel to devon/cornwall and london farily often.
I don't know the actual voltage on the secondaries, the +69/0/-69 output it what comes out of the regulated PSU, so I assume that it's slightly higher going in.
As far as I know its 3 outputs for the secondaries (so +/GND/- )
I don't know the actual voltage on the secondaries, the +69/0/-69 output it what comes out of the regulated PSU, so I assume that it's slightly higher going in.
As far as I know its 3 outputs for the secondaries (so +/GND/- )