Looking for a pair of Emission Labs EML 20A mesh driver tubes. Please let me know what you have and what you are asking for them. Thanks
Still looking for a pair of Emission Labs EML 20A mesh driver tubes. Please let me know what you have and what you are asking for them. Thanks
The 20B should work fine in place of the 20A mesh plate. I built a run of line stages about 7 years ago that originally used the 20AM (20A mesh plate) and switched to the 20B in these units last year. It is very quiet, offers the same mu and generally is as good or better than the 20A. It is also more reliable.
The Rp is significantly lower in the B but otherwise is pretty much a direct swap. (The reverse is not true) You can check with EML for confirmation
The Rp is significantly lower in the B but otherwise is pretty much a direct swap. (The reverse is not true) You can check with EML for confirmation
I’m still looking for 1 or more pairs of Emission Labs EML-20A Mesh driver tubes. Please let me know what you have and what you want for them. I’m located in the USA. Thanks