Hello all
i have just purchased a Elekit 8600S from the diy store .
Hiwever i would like some advice about possibly purchasing a second unit and run them as monoblocks ? I have never done this before and am unsure how to hook the system up ? Is it ok to only connect 1 speaker to each monoblock ?? Stress on the output transformer esp with a tibe amp - ? Do i parallel the speaker connections
what would be the sonic benefits of running them as monoblocks ??
i have just purchased a Elekit 8600S from the diy store .
Hiwever i would like some advice about possibly purchasing a second unit and run them as monoblocks ? I have never done this before and am unsure how to hook the system up ? Is it ok to only connect 1 speaker to each monoblock ?? Stress on the output transformer esp with a tibe amp - ? Do i parallel the speaker connections
what would be the sonic benefits of running them as monoblocks ??
Last edited by a moderator:
Do you want to use just one channel in each, or do you want to use both channels as one?
There are 3 potential ways to do this. Bridged, parallel, or biamp. The 1st likely won’t work(due to SE OPTs), i would check with Victor/Elekit to see if parallelin gis safe. Biamping requires a line level XO and a speaker that suits biamping.
dave
There are 3 potential ways to do this. Bridged, parallel, or biamp. The 1st likely won’t work(due to SE OPTs), i would check with Victor/Elekit to see if parallelin gis safe. Biamping requires a line level XO and a speaker that suits biamping.
dave