Hi, I want to buy the coat for the button, i.e. I have a Monacor SPH-250CTC dual voice coil 10" speaker, and looking for a suitable cabinet design.
My existing loudspeakers are dipoles that go down to about 80Hz. I want to build a passive subwoofer design with a single driver, connected the voice coils to both channels. Perhaps I could use a passive filter. The sensitivity should be about 85 dB/ 1W /1m. 35-40Hz lower cutoff is OK.
I was considering a modified Ripole, but that might not be the ideal choice. It should be compact anyway. What else do you recommend?
My existing loudspeakers are dipoles that go down to about 80Hz. I want to build a passive subwoofer design with a single driver, connected the voice coils to both channels. Perhaps I could use a passive filter. The sensitivity should be about 85 dB/ 1W /1m. 35-40Hz lower cutoff is OK.
I was considering a modified Ripole, but that might not be the ideal choice. It should be compact anyway. What else do you recommend?
I would say a high excursion woofer in sealed box...dayton mx 12 or 15...maybe 2 in a box dual opposed as you like dipole...
https://www.monacor.com/products/components/speaker-technology/hi-fi-speakers-/sph-250ctc/
The Q is very low so you are probably limited to a ported enclosure or maybe a transmission line.
The Q is very low so you are probably limited to a ported enclosure or maybe a transmission line.