Goal is high SPL and low frequency extension down to ~30 Hz, at a very low cost. Audiophile levels of detail not required. Big, robust, physically enjoyable sound is the goal.
Looking at the specs of these two drivers in vented boxes up to 4 cu. ft., crossed over at ~200Hz to a Faital Pro RS140 6.5" midrange driver, which one would you recommend? DSP based external crossover, separate amps for each driver. Or is there another driver in this $100 range that should be considered for this purpose?
Visaton W300
Dayton DSA315-8
Thanks,
Looking at the specs of these two drivers in vented boxes up to 4 cu. ft., crossed over at ~200Hz to a Faital Pro RS140 6.5" midrange driver, which one would you recommend? DSP based external crossover, separate amps for each driver. Or is there another driver in this $100 range that should be considered for this purpose?
Visaton W300
Dayton DSA315-8
Thanks,
Couldn't see a Vas number for the W300 on the linked data; it's listed as 190L here: https://www.soundlabsgroup.com.au/p/V-9069-W300/W+300+-+8+Ohm.
On the data given, there's not much in it; I'd try to find distortion measurements before deciding
On the data given, there's not much in it; I'd try to find distortion measurements before deciding