I have a Rockford summertry epx2 .
The issue I’m having with with unit is output level and the 28 band eq card doesn’t function properly .
First issue . The manual setting for the pre output it’s is 128 I have to set the unit at 165 to get any kind of decent output out of it .
Next issue is the indicators on the 28 band eq card don’t work correctly . Right channel the lights do nothing at all . The left channel only the red led flashes like I’m clipping the signal .
anyone have any ideas or are familiar with these units ?
Rockford doesn’t work on these and doesn’t know anyone that repairs them anymore
The issue I’m having with with unit is output level and the 28 band eq card doesn’t function properly .
First issue . The manual setting for the pre output it’s is 128 I have to set the unit at 165 to get any kind of decent output out of it .
Next issue is the indicators on the 28 band eq card don’t work correctly . Right channel the lights do nothing at all . The left channel only the red led flashes like I’m clipping the signal .
anyone have any ideas or are familiar with these units ?
Rockford doesn’t work on these and doesn’t know anyone that repairs them anymore
I was checking the filter caps .
They are 220uf 16 v.
Some read 221uf while others read 240uf .
I’m assuming the caps are + - 20% should I replace these caps since some are right at the high end of the 20% tolorance ?
They are 220uf 16 v.
Some read 221uf while others read 240uf .
I’m assuming the caps are + - 20% should I replace these caps since some are right at the high end of the 20% tolorance ?
Ones I had a EPX2 in the workshop for repair, the display had many cold solderjoints. Check it...