Im looking at the specs of Faitalpro 6FE200 and it suits my needs well, but does it compare to something modern with demodulation rings? I want to replace my Seas Excel w18 driver with something more efficient and with no insane breakup peaks. (I've also looked at the SB Acoustics 6.5" MW16P-4, but I think I will have a hard time getting that into a 3. or 4. order acoustic high frequency roll-off at about 3kHz without some serious crossover work.) I need to to match my 4. order acoustic Neo 3.0 hornloaded ribbon roll-off.) With the 6FE200 I hope I can use a 2.order lpf filter and get 3. order acoustic roll-off with some trial and errors with REW. So any inputs on how good sound one can achive with this driver, or links to mods done to it would be helpful! I could put a phase plug and some copper on it if anyone thinks thats a good idea. I'm not good at crossovers, but the 6FE200 looks easy to work with. I plan to use a sub up to max 2-300Hz with dsp and the upper limit needs to reach atleast 5kHz. The off -axis respons on the 4 ohms version looks very good in the 4kHz area. I can get this driver cheaply in Norway so I'm considering to try it out 🙂
I've looked at some Bms but they are a lot more expensive and Fs is often higher than I want. Xmax is also very short on those vs the 6FE200, like 0.5mm vs 4.5mm. The Faital is really a decent midwoofer from 120Hz and up 🙂
Last edited:
