Hi all
This amp has AOT460 mosfets with 100ohm gate resistors can I use 3205 with 47ohms. Thank you.
This amp has AOT460 mosfets with 100ohm gate resistors can I use 3205 with 47ohms. Thank you.
If it uses the typical emitter follower pair for the drivers, that combination should work. Of course, you should test thoroughly as always, when using subs.
That driver is rated well above the drivers they normally use so I believe it will be OK.
Use the 47 ohm resistors. To use 100 ohm, deadtime needs to be programmed in and I doubt that this amp uses deadtime.
Use the 47 ohm resistors. To use 100 ohm, deadtime needs to be programmed in and I doubt that this amp uses deadtime.