Hey all,
Will the B&C TWB100 be a suitable driver for a cubo 18?
Nominal power handling1500 W
Continuous power handling3000 W
Specs Below
Recommended enclosure200.0 dm3 (7.06 ft3)
Recommended tuning32 Hz
Parameters
Fs33 Hz
Re3.2 Ω
Qes0.34
Qms6.23
Qts0.32
Vas181.5 dm3 (6.41 ft3)
Sd1210.0 cm2 (187.6 in2)
η₀1.8 %
Xmax12.0 mm
Xvar14.0 mm
Mms268 g
Bl22.8 Txm
Le1.64 mH
EBP97 Hz
Many thanks!
Will the B&C TWB100 be a suitable driver for a cubo 18?
Nominal power handling1500 W
Continuous power handling3000 W
Specs Below
Recommended enclosure200.0 dm3 (7.06 ft3)
Recommended tuning32 Hz
Parameters
Fs33 Hz
Re3.2 Ω
Qes0.34
Qms6.23
Qts0.32
Vas181.5 dm3 (6.41 ft3)
Sd1210.0 cm2 (187.6 in2)
η₀1.8 %
Xmax12.0 mm
Xvar14.0 mm
Mms268 g
Bl22.8 Txm
Le1.64 mH
EBP97 Hz
Many thanks!
The Cubo 18 "works" with 18” drivers preferably with an EBP of 100 or higher(EBP = Fs / Qts) Fs (22-42 Hz), Qts (0.25 - 0.58), Vas (200 - 450 L) / (7.4 – 16.7 ft^3).
The BC 18TBW100 fits those parameters.
Scaling up the SS15 for an 18" driver and other compact 18" designs
Xoc1 helped in the development of the Cubo, in post #17 he shows some comparative sims.
The BC 18TBW100 fits those parameters.
Scaling up the SS15 for an 18" driver and other compact 18" designs
Xoc1 helped in the development of the Cubo, in post #17 he shows some comparative sims.
