Hello, friends!
I'm new to this forum, so please understand me if I'm making a mistake by asking this question here.
So... here's the question.
I'm building a t-line full-range speaker that will be embedded into a musical instrument. I've designed the enclosure in Hornresp, and it looks pretty good... but I'm a huge noob.
I'm afraid I've made a mistake somewhere, or if I'm missing out on an opportunity to make it better. So here I am, begging for your help : )
This is the link to the driver I'm using: https://www.tectonicaudiolabs.com/wp-content/uploads/2019/01/TEL-DS-TEBM36S12-4A_Revision1.6.pdf
This is the Hornresp simulation I'd done.
1 — ImgBB
2 — ImgBB
3 — ImgBB
Do they look okay?
Also, the vent of my t-line will not be facing the same direction as the speaker. It'll be on the side of the enclosure. Would that cause any trouble? : (
Would really appreciate any help from you guys!
I'm new to this forum, so please understand me if I'm making a mistake by asking this question here.
So... here's the question.
I'm building a t-line full-range speaker that will be embedded into a musical instrument. I've designed the enclosure in Hornresp, and it looks pretty good... but I'm a huge noob.
I'm afraid I've made a mistake somewhere, or if I'm missing out on an opportunity to make it better. So here I am, begging for your help : )
This is the link to the driver I'm using: https://www.tectonicaudiolabs.com/wp-content/uploads/2019/01/TEL-DS-TEBM36S12-4A_Revision1.6.pdf
This is the Hornresp simulation I'd done.
1 — ImgBB
2 — ImgBB
3 — ImgBB
Do they look okay?
Also, the vent of my t-line will not be facing the same direction as the speaker. It'll be on the side of the enclosure. Would that cause any trouble? : (
Would really appreciate any help from you guys!
Looks ok to me. Getting almost 100Hz from a driver with Fs of 165... just don’t expect it to do it with authority. The vent behind close to you and not reinforced by boundaries like wall or floor.
Can we know what the instrument will be or is it a secret? 😉
Can we know what the instrument will be or is it a secret? 😉
Thank you for the feedback! : )
It's for an electric guitar I'm building. Details are still kinda secret, haha. Regular speaker unit might get better Fs, but I thought wide directivity of BMR's might help make it sound more natural (make it 'feel' more like a regular guitara?)
Well, electric guitar speakers typically beam like crazy, but you're never going to replicate a 4x12" with those drivers. Go for it, and have fun.
Chris
Chris
Yep, low sensitivity driver, tiny 2.5" cone... it's not going to project far, and will even be limited in volume for the guitar player, but hey... sounds like a fun project anyway.
Good luck!
Good luck!
For a guitar sound you need the low E-string 83Hz to play full level.
Also you need a lot of juice for sustain, your tiny speaker will sound like the Alexa at the best.
Maybe you consider this one
https://www.lautsprechershop.de/pdf/fostex/fostex_fe103nv.pdf
Also you need a lot of juice for sustain, your tiny speaker will sound like the Alexa at the best.
Maybe you consider this one
https://www.lautsprechershop.de/pdf/fostex/fostex_fe103nv.pdf