Hi to everyone on here.
Looking for some help with my Linn Kaber crossover. I'm looking to upgrade the crossover by replacing the components and changing the pcb for point to point wiring.Is their a website that i could go to for the wiring diagram or could someone upload a picture of the diagram.Have drawn my own diagram from the pcb layout but not sure if i have got it right.Any help or advise would be gratefully accepted.
Thanks Steve.
Looking for some help with my Linn Kaber crossover. I'm looking to upgrade the crossover by replacing the components and changing the pcb for point to point wiring.Is their a website that i could go to for the wiring diagram or could someone upload a picture of the diagram.Have drawn my own diagram from the pcb layout but not sure if i have got it right.Any help or advise would be gratefully accepted.
Thanks Steve.
Hi Steve! How old are your Kabers? 20 to 30 years?
I can't find a crossover schematic, but a photo of the crossovers, assuming they are the same as yours, reveals high quality components.
I'd be content with simply upgrading the bi-polar electrolytic capacitors.
If you wish to go the full hogg, it looks like you may have to attach your version of the schematic for expert (that leaves me out!) scrutiny. 😎
I can't find a crossover schematic, but a photo of the crossovers, assuming they are the same as yours, reveals high quality components.
I'd be content with simply upgrading the bi-polar electrolytic capacitors.
If you wish to go the full hogg, it looks like you may have to attach your version of the schematic for expert (that leaves me out!) scrutiny. 😎
Attachments
I've just noticed you have posted in the Tubes/Valves section.
Are you talking about the internal crossover boards for Linn amps which run a fully active Linn Kaber system?
Are you talking about the internal crossover boards for Linn amps which run a fully active Linn Kaber system?
Hi Galu.Thanks for the reply.My crossover components are different.Especially the tweeter and mid-range.Definitely not as good quality.My Kabers are about 30 to 35 years old.The crossovers are passive.
I see, Steve. 😎
You're likely to get more assistance in the "Loudspeakers: Multi-Way" section of the forum.
If a nice moderator does not move your thread there, then perhaps you could repost it there under a different heading and give full details of the exact Kaber version you have. Attaching photographs of your crossovers would be helpful and don't be shy at attaching your interpretation of the schematic for perusal.
I can't help directly, but hopefully I've given your thread a nudge.
You're likely to get more assistance in the "Loudspeakers: Multi-Way" section of the forum.
If a nice moderator does not move your thread there, then perhaps you could repost it there under a different heading and give full details of the exact Kaber version you have. Attaching photographs of your crossovers would be helpful and don't be shy at attaching your interpretation of the schematic for perusal.
I can't help directly, but hopefully I've given your thread a nudge.