Boss Phantom PH5000D

Albis2985 · 2021-05-19 6:24 pm

good morning someone has a schematic or could you give me the value of the resistors R62 and R23P missing in the circuit of this amplifier.

goviboo · 2021-05-19 11:08 pm

Download the manual from the link below, the part number designations will be different, the circuits should be the same though. with some tracing you'll be able to get the values from the schematic.

Boss Audio Systems GT2500D Service Manual (Page 5 of 10) | ManualsLib

Perry Babin · 2021-05-20 3:17 am

If R162 feeds the adjacent zener from ground, it's likely a 4.7k.

Both the R23/24P are the same.

DanFS722 · 2021-05-20 1:17 pm

Perry is correct.

R24P and R24P are 6.8kOhm
R162 is 4.7kOhm

Albis2985 · 2021-05-20 4:21 pm

Thank you very much to both