• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

CHEAP Power Supply Iron - Tube and SS

Pre-spring cleaning. Used power supply transformers for sale. Prices don't include shipping.

(2) Baldwin 512-23629A Power transformers. One is older with cloth leads. They came from a Baldwin 45HP2 amp. These support (2) tube rectifiers. Solid state rectification will give you about 415 VDC. These are monsters. $35 each.

(2) 36 VCT @ 4A signal transformers. $20 each.

(1) 120V @ 4A isolation transformer. Big. $49.

(1) Tenpao TOU543005F0 toroid. 120V input: 52.4 VAC CT @ 330 VA; 14V. Nice for a SS amp. $39

(1) 12.6V Filament XFMR from Lowrey "Berkshire" organ. P/N: 41X-8 606720. $19

(1) Tibi Electronics 124/28V (unloaded) Toroid, P/N: 15-0083 Rev. A. This came from a N.E.W. power supply (basically a 24V battery charger). I'm guessing 10-12 amps here. It's big. $29

(2) Toroid Corp #4205-B. 117/24V RMS @ 6.2A. $25 each

(2) Custom (Heyboer) Eico HF-87 Power Supply XFMRs. The voltage from these is too low with a 120V power supply - they are really spec'd for about 130V mains (e.g. 5.8V on the filaments with 120), but should work up to full specs with an inexpensive 10VAC 3A boosting transformer. $39 each.

THX