Hi
SB Audience Bianco 12OB150 Open Baffle|Speakerbuddies Lautsprechershop Hifi Stereo und Heimkino
I searched and found some info about this relatively new driver, but not a thorough review.
I would like to use it as a mid bass naked from 150 to 900 HZ.
This driver is reasonably priced here in Germany, but what are the compromises? It has a stamped Basket, is that a problem using the driver nude?
I read that the basket rings, but is that notable with music playing? Could I damp it with modelling clay or something like that? Does it make noises?
Has anybody already gained some experience with that driver?
Thanks for help.
SB Audience Bianco 12OB150 Open Baffle|Speakerbuddies Lautsprechershop Hifi Stereo und Heimkino
I searched and found some info about this relatively new driver, but not a thorough review.
I would like to use it as a mid bass naked from 150 to 900 HZ.
This driver is reasonably priced here in Germany, but what are the compromises? It has a stamped Basket, is that a problem using the driver nude?
I read that the basket rings, but is that notable with music playing? Could I damp it with modelling clay or something like that? Does it make noises?
Has anybody already gained some experience with that driver?
Thanks for help.
Same price but with demodulation ring and a bit higher linear x-max. Bl is close to 12, so I don't believe the efficiency of 95 db for the SB driver but happy to be proven wrong!
Speaker Peerless SLS-P830669, 8 ohm, 12 inch
Speaker Peerless SLS-P830669, 8 ohm, 12 inch
Thank you, that seems to be a good alternative, efficiency might be a problem, since I need to lift 200Hz around 8dB so efficiency would only be 82dB/W in this application...
Measurements from SB are usually spot on, so the 95dB might be real.
Measurements from SB are usually spot on, so the 95dB might be real.
Good luck, the only way to reach this efficiency is to have lower tolerances in the magnetic gap?! Usually, this is not the case in this price range...
Does it make any difference here? Lower qts in peerless and higher mass?? I guess not when all is done and dusted?