Hi, this is my first post so welcome. Is there any possibility to measure output voltage of cartridge? I've got Ortofon Rondo Blue. On the paper there is 0.5mV but I think, there is much higher. How to chceck it? I've test record with 1kHz signal. The multimeter (mV AC) connected to output said about 0.91-0.96mV. Is it true?
Regards
Regards
It is true but does not tell you anything.
You don't know what the standard is that gives the spec of your record if it is the 5cm/sec spec. Is it into a transformer, or into an amplifier? Spec is between 10 to 200 Ohms load, so the voltage it produces is directly related to the input impedance of your phono stage/transformer.
The burning question is why do you ask? Are you having a problem? Trying to select a different head amp/transformer?
You don't know what the standard is that gives the spec of your record if it is the 5cm/sec spec. Is it into a transformer, or into an amplifier? Spec is between 10 to 200 Ohms load, so the voltage it produces is directly related to the input impedance of your phono stage/transformer.
The burning question is why do you ask? Are you having a problem? Trying to select a different head amp/transformer?