Could someone confirm than my multiple bulb Dim Bulb Tester schematic is correct?

I am building a DBT in connection with my first Pass build (Aleph J). Unfortunately, in California it seems impossible to obtain an incandescent bulb larger than 40 watts. So I am thinking of using 3 bulbs in the tester to add their wattage (two 40 watt bulbs and a 25 watt bulb). I believe I need to have the 3 bulbs in parallel and the combination of bulbs in series with the device being tested. Am I correct in that? I have attached a proposed schematic. I would appreciate it if someone could take a look and let me know if I am doing this correctly.

Thank you.

Jazzzman
 

Attachments

Thank you for the prompt responses.

Unfortunately, Amazon refuses to ship that bulb into California. I have found a 60 watt bulb. Would that be better than paralleling? My transformer is 250 VA, I have 120k capacitance.

Thank you.
 
A 60W bulb draws 0.5A, so the amplifier must draw much less than that continuously
from the AC line when it is operating normally. Otherwise, the bulb will light up.

Try a different US vendor who is selling on ebay instead.
 
Last edited:
Here Lowes and Home Depot both sell normal bulb types that have a halogen lamp inside. Those are considered energy saving (more lumens per watt) so may be available in California.

It takes a little hunting on the shelves. Also avaible are halogen spot lights with a screw base. Happy hunting!