4 modules available:
Assembled by Fab, the designer.
Mosfets 2SJ313/K2013
output Mosfets ALF16P16W/16N16W
Everything is matched.
They will be desinstalled from the chassis ; brand new ; Never never played.
The speaker protections from Mirand Audio are not included (separate listing)
US$180 each + shipping + 3% Paypal
If you prefer buying the complete amp, it is composed of : the chassis (custom), 6 speaker protections from Mirand Audio, 4 USSA 5 as described above, the PSU (SumR toroidal + VIFA bank for the USSA), Softstart Mirand Audio V1.1.
There are 2 modules TSSA V4 + 2 SMSP 600W but I cannot garantee the state of one TSSA V4 (something burnt part or fuse?).
It was assembled by Pinocchio ; top notch work and i would prefer that it be sold as one unit.
Complete amplifier : US$1300 + Shipping (very heavy) +3% Paypal
Assembled by Fab, the designer.
Mosfets 2SJ313/K2013
output Mosfets ALF16P16W/16N16W
Everything is matched.
They will be desinstalled from the chassis ; brand new ; Never never played.
The speaker protections from Mirand Audio are not included (separate listing)
US$180 each + shipping + 3% Paypal
If you prefer buying the complete amp, it is composed of : the chassis (custom), 6 speaker protections from Mirand Audio, 4 USSA 5 as described above, the PSU (SumR toroidal + VIFA bank for the USSA), Softstart Mirand Audio V1.1.
There are 2 modules TSSA V4 + 2 SMSP 600W but I cannot garantee the state of one TSSA V4 (something burnt part or fuse?).
It was assembled by Pinocchio ; top notch work and i would prefer that it be sold as one unit.
Complete amplifier : US$1300 + Shipping (very heavy) +3% Paypal
Attachments
Last edited:
Are left:
Two USSSA 5 modules
6 speaker protection modules from Mirand Audio USD30 each (was selling for Euro 70/piece ; this is a top of the line DC sensor)
One Mirand Audio soft Start USD80 (Softstart V1.1 – Mirand Audio – Solidstate designs)
Aluminum amp chassis (per picture) with rhodium bindings (6 channels) +XLR USD400 (Paid USD900 + import taxes + bindings)
Two USSSA 5 modules
6 speaker protection modules from Mirand Audio USD30 each (was selling for Euro 70/piece ; this is a top of the line DC sensor)
One Mirand Audio soft Start USD80 (Softstart V1.1 – Mirand Audio – Solidstate designs)
Aluminum amp chassis (per picture) with rhodium bindings (6 channels) +XLR USD400 (Paid USD900 + import taxes + bindings)
Last edited:
I would like to point out that I will be available to support those SMPS-600 in the TSSA V4 in the future if any support is required
Thanks!
Thanks!
Ready to travel the world.
+-25VDC 1.5A Per rail continuous current, total 3A, PEAK 15A (Music)
I have one unit in CANADA can sell it at a low price if anyone is interested
Last edited:
USSA 5 all SOLD
Trafo/Caps/Rec SOLD
Chassis RESERVED
Are left
2 TSSA modules ; one with minor repair (resistor burnt, changed and tested) ; the second one is new USD 400 for the PAIR
4 SMSPS from MicroAudio 600W @ +/-67Vdc . These are made with premium components -see pictures-
One matched pair-take off- (like new): USD70 for the PAIR
One matched pair -brand new unused-: USD 90 for the PAIR
6 DC Sensors Mirand Audio like New USD30 each (EURO 70 each ; see picture)
One Mirand Audio soft Start USD80 (Softstart V1.1 – Mirand Audio – Solidstate designs)
Trafo/Caps/Rec SOLD
Chassis RESERVED
Are left
2 TSSA modules ; one with minor repair (resistor burnt, changed and tested) ; the second one is new USD 400 for the PAIR
4 SMSPS from MicroAudio 600W @ +/-67Vdc . These are made with premium components -see pictures-
One matched pair-take off- (like new): USD70 for the PAIR
One matched pair -brand new unused-: USD 90 for the PAIR
6 DC Sensors Mirand Audio like New USD30 each (EURO 70 each ; see picture)
One Mirand Audio soft Start USD80 (Softstart V1.1 – Mirand Audio – Solidstate designs)
