FS: Exponential Wood Horns (500Hz) for 1.4" compression drivers
A pair of exponential wood horns made from birch plywood treated with special oil.
Used in two-way speakers with 18 Sound ND1460A drivers, crossed over at 500Hz with LR 4th order filters. I've included measurements with and without a crossover (see last pictures), which proves that the original response of the drivers is not different.
This means that the horns themselves are completely transparent and do not add/subtract anything to/from the music! And most importantly, the quality workmanship and design exclude the typical horn nasal sound!
GIFTS: Flat top stands made specifically for them - check the photos where they sit on the speakers' cabinets.
A few properties:
[comment]
[/comment]
Asking price for the pair: €750
Will be shipped securely via DPD to most European countries, but don't hesitate to ask me about your country.
========
Location: Sofia, Bulgaria
Contact me here or on email veselin.karavelov@gmail.com
A pair of exponential wood horns made from birch plywood treated with special oil.
Used in two-way speakers with 18 Sound ND1460A drivers, crossed over at 500Hz with LR 4th order filters. I've included measurements with and without a crossover (see last pictures), which proves that the original response of the drivers is not different.
This means that the horns themselves are completely transparent and do not add/subtract anything to/from the music! And most importantly, the quality workmanship and design exclude the typical horn nasal sound!
GIFTS: Flat top stands made specifically for them - check the photos where they sit on the speakers' cabinets.
A few properties:
- Diameter of the mouth: 57cm (22.5 ")
- Exit throat: 1.4"
- Depth of the wood horns (from mouth to throat): 28.5cm / 34.5cm with the drivers /
[comment]
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Asking price for the pair: €750
Will be shipped securely via DPD to most European countries, but don't hesitate to ask me about your country.
========
Location: Sofia, Bulgaria
Contact me here or on email veselin.karavelov@gmail.com
Attachments
Last edited by a moderator:
